Canopy Soffit Assembly Instructions

Each unit in made up of 4 four different parts:

1-each of part A Soffit.
1-each of part B Back
2-each of part C Soffit Brace
Part D Rafter/Brace (see figure 2 below for quantity for part D Rafter/Brace).

1. The Back is centered on the long edge of the Soffit and fastened to the Soffit.
    

2. The Rafter/Brace parts are installed fastened to the Back and the Soffit. 2 parts for the 30MG, 3 for the 40MG and 4 for the 60MG.
   
   Put one rafter/brace on each end and put additional braces for 40MG and 60MG in the center. 
    

3. The Soffit braces are installed from the inside corner of the Rafter/Brace at an angle toward the outside corner of the Soffit one on each corner. This part is used to stiffen the Soffit at this point.

See soffit plans for detailed drawings of parts.

Figure 1

Figure 2

Plywood Soffit Canopy Support

White ABS Canopy